Shaun Merrigan's Information Pages


Tag: Ring Doorbell Charging Solution


Ring Video Doorbell Cold Weather Charging

Posted by Shaun Merrigan in Ring Doorbell, Tech. Comments Off on Ring Video Doorbell Cold Weather Charging

24th February

Ring Video Doorbell Cold Weather Charging

This is a follow-up to an earlier post I made concerning the cold weather performance of the original Ring Video Doorbell. I have had the opportunity to observe the behavior of both the original Ring (i.e., the non “Pro”) and the Pro versions through several cycles of very cold (down to -30C) weather over the past two years, and I can now draw some conclusions.

Background information:

I have both the original Ring and the Ring Pro
The original Ring is hardwired to my mechanical chime doorbell
The Ring Pro is hardwired to my mechanical chime doorbell
The voltage at each doorbell is in the 19-20 VAC range (Klein CL1000 portable DVM)

Conclusions:

The Ring Pro doorbell seems unaffected by external temperature.  It operates properly even through prolonged stretches (10 days or more) of -20C to -30C outdoor temperatures.

The original Ring doorbell … Read More »


Ring Video Doorbell Cold Weather Charging Problem and Solution

Posted by Shaun Merrigan in Ring Doorbell, Tech. Comments Off on Ring Video Doorbell Cold Weather Charging Problem and Solution

23rd January

Ring Video Doorbell Cold Weather Charging Problem and Solution

I installed a Ring Video Doorbell (RVD) last spring (2015) and overall, I am quite happy with the utility and performance of the unit. Like any new IoT (Internet of Things) device there will be issues, growing pains and problems to be solved.  This post concerns the cold weather performance of the Ring Video Doorbell.

There are several relevant background points:

The Ring Video Doorbell is installed hardwired
The Ring Video Doorbell charges from the wiring above about -19C (-2F)
The Ring Video Doorbell is installed in a single family residence with the camera facing the street
The Ring Video Doorbell wireless signal has to penetrate wire mesh stucco and several walls to get to my router

Initially, I had my RVD motion settings to maximum sensitivity (30 ft radius) and “Standard” Alert frequency.  This meant I was … Read More »