Originally posted in March 2022
I recently completed the construction of a PC controlled vacuum tester: The Roetest. This is a computer-controlled tube tester which works as follows:
- Using the PC software, load the tube data from the extensive database
- Verify the tube data and pinout on the screen; the tester configures the pin connections automatically
- Run the tests for shorts and filament continuity
- Run the required tests
- Test the tube at full voltage and current (not a pulse test)
- Save the result
- Add the tube and test data to inventory
Construction Details:
- 4600 Solder Joints
- 600+ Components
- 20 separate circuit boards + internal wiring
- Mechanical work for building socket boxes, drilling and tapping the heatsink, assembling the case
- 150+ hours
Using the PC software, load the data for the TUT (Tube under Test). Pinout and base connection information is taken from an extensive database of over 22,000 tube types.
The TUT is put into a “socket box” which then is slid into a mating connector on the Roetest:
With the TUT inserted, we can check for shorts and open filaments automatically:
Choose the type of test to be performed and execute it:
Static (DC) Test Results for EL34 (JJ):
Curve Tracing for matching and evaluation:
When the tests are complete, all test results can be stored in the database, and an identifying label can be printed which will identify the tube in inventory.
Other functions available include:
- Matching of tubes using curves
- Identification of unmarked tubes
- Full manual control of all tube voltages
- Tube characteristics plotted over time
- Rejuvenation/Regeneration protocols
- Batch processing with automatic detection of inserted tube
- Cold short test
- Hot short test
- Transconductance curve calculation
- THD approximation
- Fully automatic testing of double (triode/triode) tube systems
- Full database management and query tools
I would describe the building process as requiring a large commitment of time, and meticulous attention to detail. I spent over 150 hours building and calibrating the Roetest, This amount of time is more than most people would take, but I wanted avoid problems caused by sloppy soldering or rushing through the assembly process. I was rewarded with my Roetest working correctly from the first power on.
Credit must go to Helmut Weigl who designed the Roetest and wrote the control and database software. He has been refining the Roetest with regular hardware and software updates for more than 12 years; I would classify it as a mature product that functions as intended: Roetest Website